Industrial valves
Globe valves
Our globe valves range goes from DN15 to DN400 and from PN10 to PN760. They can be made of stainless steel or bronze or aluminium and they can be provided with BW ends, SW ends, flanged ends, etc. Our globe valves can be intended for oxygen service, for cryogenic service, for cold box installation, for vacuum insulation, etc.
Check valves
Our check valves range goes from DN15 to DN200 and from PN10 to PN760. They can be made of stainless steel or bronze and they can be provided with BW ends, SW ends or flanged ends. The lift plug can be equiped with a spring. Our check valves can be intended for oxygen service or for cryogenic service.
Control valves
Our control valves range goes from DN15 to DN200 and from PN10 to PN760. Depending on the seat orifice, their flow coeficient Cv varies from 0,5 to 714. The flow characteristic can be linear, equal percent or else on demand. These valves can be equiped with conventional or smart positioner, air filter reducer, solenoid valve, volume booster, limit switches and can have BW ends or flanged ends.
Our control valves can be intended for oxygen service or for cryogenic service.
![]() Stainless steel control or ON/OFF valve – 600700 SERIES |
Safety valves
Our safety valves offer numerous options. The seat orifice range goes from 6 mm to 12 mm and the available set pressure goes from 0,5 bar g. to 460 bar g. They can be made of stainless steel or bronze. We can provide them with or without lever, with threaded ends, with BW fittings or flanged ends. Our safety valves can be intended for oxygen service, cryogenic service, warning purpose or thermal relief purpose.
![]() Bronze safety valve – 770100 SERIES | ![]() High pressure bronze safety valve – 775100 SERIES | ![]() Stainless steel safety valve – 770700 SERIES | ![]() High pressure stainless steel safety valve – 776700 SERIES |
Other valves
IRELAND products range is very wide and it covers most of common needs as regards industrial valves for cryogenic service and for oxygen service.
Many options are available and our engineering as well as our highly qualified staff enable IRELAND to manufacture valves as per your own specifications.
![]() Engineered valves |