Industrial valves

Our oxygen service globe valves range goes from DN15 to DN200 and from PN16 (class 150) to PN420 (class 2500). The standard material of construction of these valves is copper alloy (#CuSn). Their design includes outside screw and yoke by default. The trim is made of nickel alloy and the standard bodies have flanged ends.

Our oxygen service check valves range goes from DN15 to DN200 and from PN16 (class 150) to PN420 (class 2500). The standard material of construction of these bolted bonnet check valves is copper alloy (#CuSn). The trim is made of nickel alloy and the standard bodies have flanged ends.

Our oxygen service control valves range goes from DN15 to DN200 and from PN16 (class 150) to PN420 (class 20500). Depending on the seat orifice, their flow coeficient Cv varies from 0,5 to 714. The flow characteristic can be linear, equal percent or else on demand. These valves can be equiped with conventional or smart positioner, air filter reducer, solenoid valve, volume booster, limit switches. The standard bodies have flanged ends.

Our oxygen service safety valves offer numerous options. The seat orifice range goes from 6 mm to 8 mm and the available set pressure goes from 0,5 bar g. to 460 bar g. They are made of copper alloy (#CuSn) and the internal trim is made of nickel alloy. We can provide them with or without lever, with threaded ends or flanged ends.

IRELAND products range is very wide and it covers most of common needs as regards industrial valves for cryogenic service and for oxygen service. Many options are available and our engineering as well as our highly qualified staff enable IRELAND to manufacture valves as per your own specifications.