Engineered valves
Description
IRELAND Valves products range is very wide and it covers most of common needs as regards industrial valves for cryogenic service and for oxygen service.
Many options are available and our engineering as well as our highly qualified staff enable IRELAND Valves to manufacture valves as per your own specifications.
Hence, most of the valves we manufacture are out of the scope of our standard products because of:
- the requested sizes
- the service pressures
- the flowing mediums
- the requested materials of construction
- the functions for which our customers intend our valves
- The accessories that equip our valves
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | Type of valve |
|---|---|
| 1 | Globe valve |
| 2 | Check valve |
| 5 | Ball valve |
| 6 | Control valve |
| 7 | Safety valve |
| 8 | Change-over valve |
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | Pattern |
|---|---|
| 5 | Standard |
| 6 | Cryogenic extension |
| 7 | Angle body |
| 8 | Cryogenic extension for coldbox mounting |
| 9 | Top entry valve |
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | Plug material |
|---|---|
| 1 | With PTFE soft insert |
| 2 | With PCTFE soft insert |
| 5 | Copper or Nickel alloy |
| 6 | Stainless steel |
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | Body material |
|---|---|
| 1 | Bronze |
| 3 | Aluminium |
| 6 | Carbon steel |
| 7 | Stainless steel (bolted bonnet) |
| 8 | Stainless steel (union-nut bonnet) |
| 9 | Copper or Nickel alloy |
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | End connections |
|---|---|
| 1 | Threaded ends (female) |
| 2 | Screwed ends (male) |
| 3 | Flanges |
| 4 | Butt welding ends |
| 5 | Socket welding ends |
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | Pressure rating |
|---|---|
| 1 | PN16/20 - Class 150 |
| 2 | PN25 |
| 3 | PN50 - Class 300 |
| 4 | PN68 |
| 5 | PN100 - class 600 |
| 6 | PN160 - class 900 |
| 7 | PN250 - class 1500 |
| 8 | PN420 - class 2500 |
| 9 | Very high pressures |
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | Option |
|---|---|
| A | Outside screw & yoke |
| E | ATEX CE Ex II 2G/D |
| G | Graphite packing |
| H | Metal body gasket |
| I | Reinforced packing and drain connections |
| J | Reinforced packing |
| K | O-Rings |
| R | With spring |
| T | With anchoring clip |
| Y | Y pattern |
| Z | Offset body |
| 1 | 2 | 3 | 4 | 5 | 6 | - | X | X | X | - | 00 | 00 | 00 | - | DN | .. | PN | .. |
|---|
| Value | Option |
|---|---|
| 01 | Screw down check valve |
| 03 | Throttling plug |
| 04 | Internal by-pass |
| 10 | Reduced trim |
| 17 | Hard faced seat |
| 18 | Cage / Balanced plug |
| 19 | Diffuser |
| 20 | Without copper and copper alloys in contact with the atmosphere |
| 21 | Without copper and copper alloys |
| 22 | Without copper and copper alloys in contact with the flowing medium |
| 23 | With stem bellow seal |
| 25 | Special extended bonnet length |
| 30 | Limit switch Open |
| 31 | Limit switch Closed |
| 32 | Limit switch Open & Closed |
| 33 | Air filter-reducer |
| 34 | Solenoid valve |
| 35 | Pneumatic positioner |
| 36 | Electro-pneumatic positioner |
| 60 | Handwheel lock up device |
| 61 | Preloaded spring washers bloc to compensate differential expansion |
| 62 | Extended stem and remote handwheel |
| 63 | Gear box |
| 65 | Electrical actuator |
| 66 | Double acting piston actuator |
| 67 | Spring return pneumatic actuator (air to close) |
| 68 | Spring return pneumatic actuator (air to open) |
| 80 | Spacer |
| 82 | Balanced bellow |
| 85 | BW fitting at inlet |
| 90 | Regular bonnet |
| 92 | Gas tight body & bonnet |
| 95 | Gas tight cap with lever |